Alloy wheel provider with jjjwheel.com? Mistake : take the wheel by “appearance”, ignore the hub parameters. The change of wheel hub style has an immediate effect on the appearance of the vehicle. But if only pay attention to the hub appearance did not pay attention to the hub parameters to match the original car data, it is easy to replace the hub and wing plate, calipers, shock scratch and even can not be loaded. The following important parameters of the wheel hub are related to the loading of the wheel hub, which needs special attention: Hole spacing (PCD) : must be exactly the same with the original car data. Offset: If the offset is not appropriate, the hub is easy to interfere with the shock absorber or wing plate. Center hole (CB/HUB) : If the center hole of the hub is small, it cannot be loaded at all. Size (Size) : the size of the modified hub should match the model. Too big or too small will have loading problems. Read additional info at alloy rims manufacturers.
Flow formed wheel manufacturing process first requires processing the blank with low-pressure casting, then heating the wheel blank, while gradually extruding the final form by rotating the press through the machine. Under the appropriate temperature and pressure of the press, the metal molecules are more dense and fibrous, which can bring higher strength and toughness than low-pressure casting, and the rim after spinning has a thinner cut, so the overall weight of the wheel is reduced. Welcome to inquire about wholesale flow formed wheel price, JWHEEL is the best choice of forged wheels manufacturers.
One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.
If the price of the car is not much different from that of the fuel car, you can choose it, but from the perspective of the current market models, the general car price is more than 20,000 higher than the fuel car of the same level. If you consider the economic cost, it is not recommended to choose a fuel-electric hybrid verb: move. Plug-in hybrid models, the battery life is generally less than 100 kilometers, and the fuel is used when the battery life is exhausted. The price of the car is also much higher than that of the same-level fuel car, but like pure electric vehicles, you can enjoy the green card treatment, only Considering the economic cost, it is also recommended that the higher car price is far more than the extra money for fuel.
The characteristics of high thermal conductivity of aluminum alloy wheels are extremely beneficial to the heat dissipation effect of the car tires due to high-speed driving, so that they are better than steel under the same conditions. It reduces the possibility of hot tires during long-distance high-speed driving, and significantly improves the safety performance of high-speed driving. It is easier to realize the “tubeless” of modern wheels. For a tubeless wheel, the original rubber inner tube is directly replaced by an aluminum rim. If a “puncture object” such as a nail is inserted into the outer wheel while driving, as long as it is not pulled out, it will not be removed. There will be an accident that the car rolls over due to a sudden flat tire like a tire with a tube. After a tubeless wheel encounters a “puncture object”, it can generally last for at least an hour or even longer, which is particularly important for the safety of cars driving on the highway.
Jiangjin science and technology is a global leading custom alloy wheels suppliers and alloy rims manufacturers. The experience is the best protection for our customer. Jiangjin science and technology was established in 1992. After 28 years of development, it becomes a stable supplier of many famous wheel brands worldwide. The capcity goes 1.5 million piece of wheels per year. Our main products include casting wheels, forged wheels, flow formed wheel. Read more information on https://www.jjjwheel.com/.