Excellent magnetic track light wholesale manufacturer: How to choose LED landscape lighting? Before buying LED outdoor landscape lighting, there are some essential things to take into consideration. The first thing to consider is how much light you need? You can choose from spotlights, floodlights, or wall packs. There are different wattages available depending on the size of your place. Another thing to consider is the kind of light that you need. As there are three types of lighting fixtures, you can choose from fully shielded, partially shielded, and non-shielded lighting fixtures. Before buying LED landscape lighting, you also need to consider the lumens per watt rating. This reading will tell you how much light is being put out by a fixture. A lower number means that the fixture emits more lumens, while a higher number indicates fewer lumens emitted from that fixture. Find more details on led light manufacturers in china.
In terms of size, the magnetic track is mainly divided into two types: 20mm width (M20) and 35mm width (M35). The width of these two track strips determines the width of the corresponding magnetic lamp track head. That is, a 20mm wide track can only be installed with lamps with a 20mm width track head, and 35mm is also the same. Of course, recently there has been another slim type track, only with 15mm available in markets. From the installation way, the magnetic rails include a recessed magnetic track, suspended magnet track, and surface-mounted magnetic rails.
Outdoor floodlights, also known as outdoor spotlights, almost all large-area lighting fixtures used outdoors can be regarded as floodlights. It is often used in stadiums, building outlines, squares, overpasses, tunnels, parks and backyards, gardens, etc. As these lamps have a large number of options in the market with different specifications, it may be challenging to choose suitable floodlights for different application. You need to consider the following factors when you choose which outdoor LED floodlight is working for you.
Exterior landscape flood lights: This type of floodlight is mainly used for lighting effects of outdoor landscapes, such as illuminating trees and rockery at night. Their power is mostly less than 50W, and their light-emitting angle is mostly 30°. Mostly used in parks, squares and other places. Low voltage LED flood lights: The input voltage of this kind of floodlight is generally AC/DC12V 24V 36V 48V 60V. Compared with the high-voltage 110Volt or 220VAC input floodlight, the low voltage type will be safer, especially when it is installed outdoors, and easy to be touched by human being. Mostly used in special places such as ships, mines, petrochemicals, petrol stations, etc.
Durability: Make sure the lights are made of durable materials that can withstand the elements. Warranty: Make sure the lights come with a good warranty in case of any defects. a good solar street light manufacturer or supplier will provide 3years warranty at least. Which sensor is used in solar street light? A light-dependent resistor (LDR) is typically used in solar street lights to detect the presence of light. The LDR is used to detect the amount of light present and to turn the street light on or off accordingly.
GRNLED is a commercial Led floodlight manufacturer, supplier, and factory in China, We can accept OEM/ODM floodlights orders for commercial application. The color temperature can be single color such as 3000K Warm white, 4000K daylight, 6500k cold white, Green / Purple / Orange / Red / Blue, or to be RGB LED Floodlights. Widely applied for commercial outdoor places such as parking lots, backyards, schools, football fields, tennis court lighting, basketball lighting, etc. Stronger R&D: We are always keeping innovation in led lights according to markets trend. It is ok to research and development based on your ideas and advice.
There are 3 types of magnetic tracks for the smart dimmable magnetic track light system: recessed magnetic track for embedded installation or trimless installation, surface mounted magnetic tracks for surface ceiling or wall mounted, and suspended installation with steel ropes. Black magnetic track, white magnetic tracks options. Each magnetic rail track can be cut off freely. The standard length for magnetic tracks is 1000mm, 2000mm, and 3000mm.
We are the best industrial Led Floodlight manufacturer, factory, and supplier in China. The following floodlight types’ light sources can be both SMD and COB-led chips. They are all at competitive prices and have stable quality. Most of them are with a high-quality constant current isolated driver, PF>0.9, surge protection up to 2KV-6KV, 2/3/5Years warranty. The materials adopt an aluminum heat body and toughed glass cover, Protection grade up to IP65 and IK08. Widely used as industrial lighting for construction sites, factories, and tunnels, or as outdoor landscape lighting for external walls, tree lighting.
What are the types of solar street lights? Standalone Solar Street Lights: Standalone solar street lights are independent of the grid and require no external power supply. They are powered by a solar panel and battery combination and are typically used in remote areas where grid power is not available. Grid-Connected Solar Street Lights: Grid-connected solar street lights are connected to the grid and require an external power supply. They are powered by a solar panel and battery combination and are typically used in urban areas where grid power is available.
LED is latest technology in lighting, it can be saving much more 60% at least then traditional metal halide flood lamps, for example, 20W LED Flood light is ok to replace 150Watt old floodlights. All of old flood lights fixtures are with E27 OR R7S bulb, there are same e27 and R7S LED Bulb to replace them, it is easy to do replacements. Just check if the input voltage of led flood light bulb is same as existing metal halide bulb, because there are 220-240VAC Input and 110-120VAC input types optional around the world. Discover even more information at https://grnled.com/.
As a professional led lighting manufacturer and factory, our positioning is to be a customer’s technical, production, after-sales, R&D team, quickly and professionally provide various lighting solutions to solve various lighting problems encountered by customers. Our customers only need to do a good job in the sales of LED lamps, the other things such as controlling cost, lighting design & solutions, and after-sales, we will help customers deal with it in order to maximize customer benefits.