Quality industrial s&a chillers manufacturer and supplier? Rigorous Quality Control: As one of professional industrial chiller manufacturers, Quality is our top priority and it goes throughout the whole production phases, from the purchasing of the raw materials to the delivery of the chiller. Each of our chiller is tested in laboratory under simulated load condition and it conforms to CE, RoHS and REACH standards with 2 years of warranty. We Are Always There For You: Our professional team is always at your service whenever you need information or professional help about industrial chiller. We even set up service points in Russia, UK, Poland, Mexico, Australia, Singapore, India, Korea and Taiwan to provide faster service for the oversea clients. See more info at s&a chillers.
But no matter what laser cutter you get in the end, there is one thing you can’t ignore – cooling problem. Either CO2 laser or fiber laser can generate heat in the operation. And the higher the power, the more heat the laser cutter would generate. If those heat continues to accumulate, it will certainly lead to serious problem like machine shut down. And a laser chiller is often the “cure” for this issue. S&A Chiller offers a wide variety of laser water chillers for fiber laser, CO2 laser and many other laser sources ranging from low power to high power. The cooling capacity can be up to 30KW and the temperature stability can be up to ±0.3°C. With 20 years of experience, S&A Chiller has helped many users in more than 50 countries to solve their overheating problems.
As a good partner to maintain the stable and continuous operation of laser equipment, chillers are also developing towards higher power with fiber lasers. Taking S&A fiber series chillers as an example, S&A initially developed chillers with a power of 500W and then continued to develop to 1000W, 1500W, 2000W, 3000W, 4000W, 6000W, and 8000W. After 2016, S&A developed the CWFL-12000 chiller with a power of 12 KW, marking that the S&A chiller has also entered the era of 10 KW, and then continued to develop to 20 KW, 30 KW, and 40 KW. S&A continuously develops and improves its products, and is committed to providing customers with stable and reliable high-quality products to ensure the stable, continuous, and efficient operation of laser equipment.
In the actual use, there are often some urgent problems that need to be solved in mold. And the most important one is the cleaning of the mold. Some metal molds are used to be the prototyping of high temperature hot melting material. When the products have finished and are taken out from the molds, there are often material residue left on the molds. This requires people to clean the molds, for this will affect the next product making, but that would be quite time consuming. What’s more, molds are easy to get rusty. Since most of the industrial molds are made from steel, they would become rusty after being used for a period of time. And molds need to be cleaned properly before they are used on the machine. However, traditional cleaning would cost a huge labor and cost, which is very bad for the manufacturers.
S&A CWFL series air cooled chillers could be your ideal cooling solution. They are designed with dual temperature control functions and applicable to cool 500W to 30000W fiber laser. Sizing the chiller is generally determined by the power of the fiber laser. CO2 laser is commonly used in laser cutting, laser engraving and laser marking on non-metal materials. But whether it is DC tube (glass) or RF tube(metal), overheating is likely to happen, causing expensive maintenance and affecting the laser output. Therefore, maintaining consistent temperature is of utmost importance to CO2 laser. Find even more info at teyuchiller.com.