Posts in category: Industrial

Magnetic core supplier in China? Nanocrystalline core is getting more and more popular in the electronic and electrical industries, for its high electrical performances. Our features nanocrystalline core material products are Nanocrystalline Common mode choke cores and Nanocrystalline Current Transformer cores. Discover more info on magnetic core manufacturers. As we focus on the improvement of the quality, this product has been manufactured with high quality and stable performance. It is of fine workmanship and good quality and is well sold in the domestic market. A positive market response indicates that the product has a good market prospect.

We know that the actual transformer always works in AC state, and the power loss is not only on the resistance of the coil, but also in the iron core magnetized by alternating current. Usually, the power loss in the iron core is called “iron loss”. The iron loss is caused by two reasons, one is “hysteresis loss” and the other is “eddy current loss”. Hysteresis loss is the iron loss caused by the hysteresis phenomenon in the magnetization process of the iron core. The size of this loss is directly proportional to the area surrounded by the hysteresis loop of the material. The hysteresis loop of silicon steel is narrow, and the hysteresis loss of transformer core made of silicon steel is small, which can greatly reduce its heating degree.

The common mode inductor using nanocrystalline core material can well suppress the peak voltage, protect sensitive components, and reduce the motor shaft voltage. Because of the unique characteristics of nanocrystalline core, it has been well used in some high-power system industries. Electric energy meter, power meter, ammeter, electric measuring equipment and other instrument fields. Various power current transformers in power transmission and distribution monitoring system. Leakage protection, relay protection, servo motor protection, fire monitoring, etc Current and voltage data sampling, etc.

Transmart amorphous core manufacturer & supplier is mainly engaged in the production and sales of amorphous core materials. The amorphous core transformer is one of Transmart Industrial’s multiple product series.Transmart Industrial’s amorphous C-core is manufactured in strict accordance with relevant national standards. Every detail matters in the production. Strict cost control promotes the production of high-quality and priced-low product. Such a amorphous transformer is up to customers’ needs for a highly cost-effective product. Discover more details on https://www.transmart.net/.

However, at the same BM, the loss of Fe based amorphous alloy is smaller than that of 0.23mm thick 3% silicon steel. It is generally believed that the reason for low loss is the thin thickness and high resistivity of iron-based amorphous alloy strip. This is only one aspect. The main reason is that the iron-based amorphous alloy is amorphous, the atomic arrangement is random, there is no magnetocrystalline anisotropy caused by atomic directional arrangement, and there is no grain boundary causing local deformation and composition offset. Therefore, the energy barrier hindering domain wall motion and magnetic moment rotation is very small, with unprecedented soft magnetism, so it has high permeability, low coercivity and low loss.

At present, up powder core occupies the main share in the high-end market. However, due to the complex manufacturing process of M, that is, powder core and the noble price of raw materials, the price of powder core remains high and the scope of application is restricted to a certain extent. In recent years, iron-based nanocrystalline soft magnetic powder core has attracted much attention because of its low price, simple preparation process and excellent performance. Its research is quite active, which is expected to replace the local use of up powder core and be applied in the field of high frequency.

Biscuit making machine factory 2022? Biscuit production line used for automatic making biscuits. Whole line including raw material handling, dough mixing, biscuit forming, biscuit baking, biscuit cooling, biscuit sandwich, and biscuit packing, etc. Available for one kind of biscuit made by using one production line, or a variety biscuit made by using one multifunctional production line. Normally can divide into 2 kinds(according to soft dough biscuit or hard dough biscuit). Specifically divided into 13 kinds(according to finished product). Discover even more information at https://www.foodsmachine.net/biscuit-production-line.html. Pursuing innovative technology is our goal; meeting customized requirements is our mission; guaranteeing excellent after-sale service is our purpose. Providing customers with a whole automatic biscuit machinery line from material dosing to packing. With our own manufacturer STM factory and HP factory in the national A-class industrial zone, R&D center office in the downtown of Zhuhai city, we unite the highest quality standards and innovation in the Golden Bake.

The raw material auto-dosing system is placed at the upstream of biscuit production line . The system can ensure that the main material in your formula can be set at the point of time, at right dose, and added to the correct production process. For the feeding, we utilize the Complete self-suction feeding technology. It is equipped with Vertical dust-free integrated machine for sugar crushing, mixing, storage, metering and discharging, it is Designed especially for sugar crushing in baking industry. What’s more, with the efficient and durable negative pressure dust-free handling technology, our silo system has unique design of fast detachable filter device, which can clean quickly without dead corner.

Automatic system, automatic soluiton, automatic system post baking. When the biscuits coming from the line depending on line capability are centralized by deducting into definite lines, reversed, aligned and fed automatically by aisle to sandwich machine or coating machine. According to customer’s factory shape can optional with turning conveyor device or cantilever conveyor device. Professional conveyor system can effectively reduce labor costs and increase output.

The sponge and dough are usually mixed on vertical spindle mixers.The yeast should be dispersed in water before feeding to the mixing bowl. The dough is mixed to the temperature of 30-35?, which is the optimum temperature for the action of the yeast.The sponge is fermented for specific time at the specific temperature(according to the biscuit). During this time the PH value of the dough will increase. After the fermentation of the sponge, the dough trough is taken bake to the mixing room.Times of the fermentation according to the type of biscuit.

Dough forming machine section is mainly used for forming the dough. Different biscuit uses different forming section. The forming machine used is also different. The forming of hard dough biscuit is much more complicated than soft dough biscuit. Dough shaping machine used is different. Soft dough biscuit forming by the rotary moulder. The dough should be fed very evenly and consistently to the hopper of the rotary moulder, maintaining an even level across the width of the machine during the production. See additional information on https://www.foodsmachine.net/.

Level switch wholesale from China? For radar level gauges, there are many reasons for interference and many sources of interference. We analyze from four aspects: internal, external, AC and DC. Celestial and celestial interference, first of all, what is celestial interference? Celestial objects refer to the sun or other stars, therefore, celestial interference refers to the interference of their electromagnetic waves on the radar level gauge. We are very unfamiliar with Tiandian. The so-called Tiandian is usually understood as the interference of the signal of the magnetrol radar level gauge caused by the ionization of the atmosphere, lightning, or the electromagnetic waves generated by natural phenomena such as volcanoes and earthquakes. See more info at https://www.kaidi86.com/product.html. Our Radar Level Meter has a range of up to 150 meters, frequency up to 120GHz and an accuracy of ±1mm, which can cope with various complex measurement conditions.

Under many operating conditions, ultrasonic level meter and radar level meter are commonly used. Some users are very entangled in the choice of these two level meter and do not know how to choose. Today, let’s talk about the principles and selection principles of these two types of level meter . Principle and selection principle of ultrasonic level meter. Working principle: The ultrasonic pulse probe emits a beam of ultrasonic pulses to the measured medium, and the sound wave is reflected by the liquid surface. The distance between the liquid levels is measured by measuring the time difference between the emission and reflection of the sound waves. Since the ultrasonic level gauge is not a liquid, it can be used to measure corrosive, non-volatile and non-foaming places.

Application conditions, application conditions generally include calm liquid level, slightly fluctuating surface, turbulent surface, with stirring, with foam and so on. The more complex the conditions, the more interference echoes, and the smaller the actual measured range. In a complex environment, a precision radar with strong ability to deal with interference echoes or an antenna with a larger size should be selected.

There is AC interference and the voltage is high. For example, for the radar level meter used in the production line, the power supply requirement is 24VDC (typical value), but in the on-site measurement, it is found that the power supply is displayed as 27.2V, which is significantly higher than 24VDC, resulting in a large measurement result and even a radar level meter. crash phenomenon. The installation position of the radar level meter is incorrect, which leads to deviations in the measurement. For example, the accumulation of aggregates in the transfer bin is a “mountain”-shaped cone, but only one radar level meter is installed near the discharge port of the return belt. , the installation position is too close to the discharge opening of the return belt, and at the same time, it is too far from the discharge opening of the feeding belt on both sides. Just below the radar level meter is the drop point of the return belt. If the distance is too close, the aggregate in the falling process will interfere with the radar level meter and form false reflections.

As one of the most professional magnetic level indicators manufacturers in China,Guangdong Kaidi Energy Technology Co., Ltd. provides customized solutions for a range of industrial automation process applications,such as mechanical float level indicator.We specialized in radar level gauge, fork type level switch,etc. These were implemented successfully, and KAIDI magnetic level gauge manufacturers products,such as radar level meter, magnetic level indicators, can be used in many different industries such as food & beverage, water, energy, pharmaceutical etc. See even more details on https://www.kaidi86.com/.

Excellent pneumatic press machine provider in China? Fast delivery standard machines stock for sale: Standard C frame single crank press and eccentric press are always some units stocking for sale. 2 weeks to 30 days lead time for customized order. Big press line such as car body parts stamping line could be ready for shipment within 4 months after order. Read more info on power press machine. We can provide installation service for all the sold out machines at customer factory. Small machines can be shipped assembled and some big machines must be shipped disassembled. That is why we provide installation service to our customer.

Even if there are shelves full of molds, don’t assume that these molds are suitable for the newly purchased machine. The wear of each mold must be checked by measuring the length from the front end of the punch to the shoulder and the length between the shoulder of the female mold. For conventional ols, the deviation per foot should be about t0.001 inches, and the total length deviation should not be greater than t0.005 inches. As for the precision grinding mld, the accuracy per foot should be ±0.0004 inches, and the total accuracy should not be greater than ±0.002 inches. It is best to use fine grinding molds for CNC bending machines, and conventional molds for manual bending machines.

Hydraulic transmission is adopted, and the slider part is composed o slide, an oil cylinder and a fine-tuning structure of a mechaicl stoper. Te left and right oil cylinders are fixed on the frame, the piston (rod) drives the slider to move up and down through hydraulic pressure, and the mechanical stop is controlled by the numerical control system to adjust the value; Workbench part: controlled by the button box, the motor drives the stopper to move back and forth, and the moving distance is controlled by the numerical control system. The minimun reading is 0.01 mm (the front and rear positions have travel switch limits).

Under the same load, the deflection of the worktable and sliding block of the 10-foot machine is 4 times that of the 5-foot machine. This means that shorter machines require fewer shim adjustments to produce qualified parts. Reduced shim adjustment and shortened preparation time. Material grade is als a key factor. Compared with low-arbon sel, the load required by stailes stee is usuall increasedby about 50%, while most grades of soft aluminum are reduced by about 50%. You can get the machine’s tonnage table from the bending machine manufacturer at any time. The table shows the estimated tonnage required per foot length unde diffrent thicknesses and different materials.

Modern and sophisticated materials are used in automotive engineering not only for the outer skin and structure of the actual car bodies but are also used in vehicle components such as the chassis, drive train, seats or trim parts. Auminum and steel are used for many components in the form of strips, sheets or plates, which are processed and formed in various manufacuring processes from semi-finished products to finished components. Even during these process steps, special demands are placed on the components. Due to the automated handing, good flatness and theloest possible degree of cut are very important for a machining procss itout comliations. Ifhese qualit criteria o not correspond to the defined specifications, there is no process reliability. Find even more details at https://www.pressmachine-world.com/.

Golden horse rides provider with Jinma Rides? Engaging top professionals in the industry, Jinma has been able to assemble a professional research and development team, headed by leading experts in respective disciplines. This strong team is composed of 9 senior engineers, including 2 professor-level engineers, and 180 full-time designers and developers, in disciplines of mechanical engineering, mechanics, automation, electronic information, computer science, composite materials, industrial design, art and craft, and multi-media content creation. Discover additional info at amusement rides manufacturers.

A Carousel or Merry go Round ride is a time-tested popular amusement ride. It features a rotating patform on which exquisitely crafted FRP horses and chariots are mounted. Those horse are designed to move up and down. With the platform rotating, it creats a feeling of galloping for the riders. The earliest recorded carousel appeared in the Byzantine Empire. Around 1860, the first carousel powered by steam appeared in Europe. Nowadays, you may find various carousels at parks, playgrounds, shopping malls and other venues.

As amusement rides are one kind of special equipment, each production link is directly or indirectly related to its safety performance. Through skill competition, the craftsman spirit can be carried forward and the industry skills improved by building a platform for contestants to show their skill quality and level. It is deemed as a boost to workers’ professional quality and advanced manufacturing industry, and to further standardization and perfection of their skill level. The competition involved 224 participants and covered 87.5% of types of work in the workshops. Each employee actively took part in the competition and showed their true skill level by completing the competition tasks within the specified time according to the drawings or competition rules. After fierce competition, 56 workers finally stood out, which displays Jinma’s pursue for high-standard and high-quality products.

Jinma Rides keeps ramping up R & D in immersive attractions that integrate the ride system with various effects including lights, sounds, wind and animation to replay a story in the most vivid way. Motion Dark Ride adopts innovative six degree of freedom dynamic platform to take passengers through the dynamic cabin to shuttle through different story scenes composed of theme landscape, high-definition film, machine model, sound effect, etc. It is definitely an excellent experiential ride attractions with high immersion.

Jinma operates its businesses in the emerging cultural industry, cultural tourism equipment manufacturing industry, and game&amusement industry. By integrating creative concepts, advanced technologies and safety concepts, Jinma has developed a large portfolio of more than 300 rides under 13 categories, covering coasters, tower rides and immersive attractions, and many of them are the first of its kind ever built in China and abroad. Read additional information on https://www.jinmarides.com/.

Premium level indicator manufacturer? The radar level gauge works by electromagnetic waves. Its working principle is to measure the specific liquid level by transmitting electromagnetic waves to the measured target. After the electromagnetic waves are emitted, they are reflected by the medium. For the radar level gauge, its key function is to ensure that it can transmit magnetrol guided wave radar signals smoothly. In our industrial production site, interference often occurs, so which interference sources will affect the measurement of the radar level gauge? let’s see. Read additional information at level switch manufacturer. OEM Service-can be customized according to the application of customer,such as level gauge,level switch and level indicator.

Working principle: Working principle of radar level gauge: UHF electromagnetic waves are transmitted to the liquid level of the container under test through the cable or antenna. When the electromagnetic wave touches the liquid level and is reflected back, the instrument detects the time difference between the initial wave and the echo, thereby calculating the liquid level height. Select guided wave radar or airborne radar according to the dielectric constant and measurement length of the measured medium.

Measurement accuracy, the accuracy of ordinary radar is generally ±10mm, and the accuracy of precision radar is ±3mm. Selection according to the actual needs of production. Range, according to actual needs, choose the antenna size. Note that the actual range is reduced in complex environments. Antenna type and antenna size, the larger the antenna size, the larger the measured range and the stronger the anti-interference ability. The antenna types of radar level gauge are rod type, bell mouth type, paraboloid and so on.

The influence of dust accumulation on the transmitter head of the radar level meter, due to the large amount of dust in the working condition of the radar level meter, the dust is easy to adhere, and affected by the ambient temperature, the dust is wet and easy to agglomerate, and the dielectric constant will become larger and adhered The transmitter head and the wall of the bell mouth of the radar level meter affect the accuracy and stability of the radar measurement.

As one of the most professional magnetic level indicators manufacturers in China,Guangdong Kaidi Energy Technology Co., Ltd. provides customized solutions for a range of industrial automation process applications,such as mechanical float level indicator.We specialized in radar level gauge, fork type level switch,etc. These were implemented successfully, and KAIDI magnetic level gauge manufacturers products,such as radar level meter, magnetic level indicators, can be used in many different industries such as food & beverage, water, energy, pharmaceutical etc. Find extra info on kaidi86.com.

High quality nanocrystalline transformer core manufacturer today? Transmart transformer manufacturers are an export oriented company with customers located in 40+ countries. We supply high quality tape wound cores in Nanocrystalline, Amorphous and Silicon Steels. Product applications including Common mode chokes ,Hall Effect Current Sensors, Low Voltage and Medium Voltage instrument transformers, Earth Leakage Circuit Breakers ,Reactors, Inductors etc. See more information at https://www.transmart.net/nanocrystalline-cores. Transmart Industrial insists on the use of high-quality materials and advanced technology to manufacture soft magnetic materials. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price.Transmart supplier has a complete and mature service team to provide excellent services for customers and seek mutual benefit with them.

We know that the actual transformer always works in AC state, and the power loss is not only on the resistance of the coil, but also in the iron core magnetized by alternating current. Usually, the power loss in the iron core is called “iron loss”. The iron loss is caused by two reasons, one is “hysteresis loss” and the other is “eddy current loss”. Hysteresis loss is the iron loss caused by the hysteresis phenomenon in the magnetization process of the iron core. The size of this loss is directly proportional to the area surrounded by the hysteresis loop of the material. The hysteresis loop of silicon steel is narrow, and the hysteresis loss of transformer core made of silicon steel is small, which can greatly reduce its heating degree.

Commonly used transformer cores are generally made of silicon steel sheets. Silicon steel is a kind of steel with silicon (silicon is also called silicon), and its silicon content is 0.8 ~ 4.8%. The reason why silicon steel is used as the iron core of transformer is that silicon steel itself is a magnetic material with strong magnetic conductivity. In the energized coil, it can produce large magnetic induction intensity, which can reduce the volume of transformer. rolled silicon steel sheet is selected. It is cut into long pieces according to the size of the required iron core, and then overlapped into “day” shape or “mouth” shape. In principle, in order to reduce eddy current, the thinner the silicon steel sheet, the narrower the spliced strip, and the better the effect. This not only reduces the eddy current loss and temperature rise, but also saves the material of silicon steel sheet. But in fact, when making silicon steel sheet iron core. Not only from the above favorable factors, because making the iron core in that way will greatly increase the working hours and reduce the effective section of the iron core. Therefore, when making transformer iron core with silicon steel sheet, we should start from the specific situation, weigh the advantages and disadvantages and choose the best size.

As one of Transmart Industrial’s multiple product series, mumetal cores series enjoy a relatively high recognition in the market. Transmart Industrial provides diversified choices for customers. The mu-metal cores are available in a wide range of types and styles, in good quality and in reasonable price.Transmart Industrial effectively improves after-sales service by carrying out strict management. This ensures that every customer can enjoy the right to be served. Find extra details on transmart.net.

Amorphous nanocrystalline alloys are competing with soft ferrite in the field of medium and high frequency. In 10kHz to 50KHz electronic transformer, the working magnetic flux density of iron-based nanocrystalline alloy can reach 0.5T and the loss P0.05 5 / 20K ≤ 25W / kg, so it has obvious advantages in high-power electronic transformer. In 50 kHz to 100 kHz electronic transformer, the loss of iron-based nanocrystalline alloy is P0.05 2 / 100k is 30 ~ 75W / kg, Fe based amorphous alloy P0.05 2 / 100k is 30W / kg, which can replace some ferrite markets.

On the one hand, it can isolate eddy current, and the data is suitable for higher frequencies; On the other hand, due to the gap effect between particles, the data has low permeability and constant permeability; Because the particle size is small, there is basically no skin phenomenon, and the change of permeability with frequency is relatively stable; Moreover, the powder core can be prepared into special-shaped parts of various shapes for different fields; Finally, the damaged strip in industry can be crushed into magnetic powder, and then made into magnetic powder core, which can reduce the loss and improve the use value of data. The magnetoelectric properties of magnetic particle core mainly depend on the permeability of powder material, size and shape of powder, filling coefficient, content of insulating medium, forming pressure and heat treatment process.

Top rated ethylene bis-stearamide provider? Sainuo is the leading polyethylene wax manufacturer and EBS wax supplier for PE wax, Ethylene bis-stearamide, etc. Polyethylene wax lubrication dispersant with an annual output of 30,000 tons, production scale of international production base, 60,000 tons of production and sales capacity. For quotation, TDS, samples request, please contact us. If there is anything you’re not sure about or you just need a hand getting set-up you can call or email us(polyethylene wax supplier). Discover extra information on n n ethylene bis stearamide.

Its performance is comparable to the US Honeywell AC wax. It can improve the production efficiency of plastic processing, reduce the production cost, has good compatibility with polyolefin resin, etc. Oxidized PE wax has good moisture resistance at normal temperature, strong chemical resistance, excellent electrical properties, and can improve the appearance of finished products. Oxidised polyethylene wax can replace the products of Mengdan wax, Sichuan wax, liquid paraffin, microcrystalline paraffin, natural paraffin and polyethylene wax, etc, and its performance is comparable to that of the Honeywell A-C wax.

Intermediate content of 10-12%, mainly used for powder coating treatment and increase capacity flow. In the grinding pigment (filling) process of producing pigments and inks, a metering coupling agent can be directly input, which can improve the dispersibility of the pigment or filler, shorten the grinding time, increase fineness, brightness, and reduce viscosity. Atactic polypropylene is effectively solve the problem of high filling system debris, improve the toughness of products, can replace the use of carrier, but also can replace the use of lubrication. Atactic polypropylene is used in filler masterbatch, etc Discover extra information at sainuowax.com.

Colorants are the main components of color masterbatch. They provide all the required colors and characteristics. Inorganic pigments: black and white pigments represented by titanium dioxide and carbon black; Iron oxide, metal oxide mixed crystal series, ultramarine, metal sulfide, etc; Organic pigments: azo series, phthalocyanine series, heterocyclic (fused ring) series, etc; Organic dyes: solvent dyes, disperse dyes (part), vat dyes (part); Effect pigments: Mica (pearlescent) pigment, copper gold powder, aluminum silver powder (slurry).

The internal and external lubrication is insufficient, the melt viscosity is large, the plasticizing torque is large, and the melt wall sticking phenomenon is serious. There is a yellow decomposition line on the material surface, the surface smoothness is poor, and the mechanical properties of the product are reduced: the internal and external lubrication is excessive, the plasticizing torque is small, and the melt plasticization is obviously insufficient. Although the product has good smoothness, the pressure point adhesion is poor, which seriously affects the mechanical properties of the product.