MIG welders online provider in the United Kingdom? Welding Supplies Direct stock a wide range of mag drills from industry leading manufacturers such as JEI Solutions, Alfra, Rix Tools, FEIN & Holemaker Technology. Our flagship mag drill partner, JEI Solutions, have a range that is suitable for every drilling / broaching application; be it low profile applications, on-site cutting for structural jobs or simple at home, DIY drilling. The HMT VersaDrive V35 is a British made 35MM mag drill that is available in both 110V & 230V input voltages. It has a 35MM maximum cut capacity with a 110MM maximum cutter length and is perfect for all drilling applications, especially structural steelworks. See additional info at mag drills.

If you’re looking for quality metal grinding wheels, Makita is a brand worth checking out. This wheel is perfect for quickly grinding through metal, making it an essential tool for any serious metalworker. With its durable construction and precision-cut teeth, the Makita Metal Cutting grinding wheel is sure to become a favorite in your workshop. These angle grinder wheels are designed for use with Makita 5? angle grinders. It has grain grit, a hard bond matrix, and wheel thickness that provide the best balance. This tool will cut more than other wheels because it’s made of carefully selected materials. You can use it to cut through all metal materials, including metal, steel, and inox steel. In addition, this product can even cut through sheet metal, rebar, steel pipe as well as small to medium diameter pieces of solid material. The grain on these cutting grinding wheels is made from a high-performance aluminum oxide which will provide a long life span for the product. Not only does it lasts a long time but also the material is able to soothe many tough materials with little effort.

Although this class of welders is referred to generically as MIG welders, the technical definition is “wire feed”, meaning they use a motor-driven spool to feed wire into the weld puddle. MIG means “Metal-Inert Gas” and refers to a flow of inert gas that shields the metal wire as it is consumed and melts into the puddle. If the machine isn’t able to connect and regulate a flow of inert gas like argon or carbon dioxide, it’s technically not a MIG welder. An example in this review is the Forney Easy Weld 140 FC-i, which doesn’t have gas shielding capability. This is a flux-core wire feed machine. The wire that’s used in these machines has welding flux embedded in the core. When it hits the arc, the metal melts and the flux is released as vapor, providing a shielding gas. This was originally designed as a way to deal with windy conditions defeating the gas shield of a MIG torch. It’s not as clean as true MIG welding but usually, the difference is minor, especially in a home workshop setting. However, with aluminum or stainless steel, the weld won’t be correctly joined without true gas shielding and a quiet setting. Flux core won’t be enough for these projects.

Delivery of parts to the welding station in an organized and logical fashion is also a way to reduce welding costs. For example, one company was manufacturing concrete mixing drums. In the fabrication process, the company produced 10 parts for one section, then went on to make 10 parts of another drum section, etc. As pieces came off the line, they were put onto the floor of the shop. When it was time to weld, the operator had to hunt for the pieces needed and sort through them. When the outside welding expert pointed out the amount of time being wasted in this process, the company started to batch each one on a cart. In this way, the pieces needed to weld one drum were stored together and could easily be moved to the welding area. This type of scenario is also true for companies that may outsource parts to a vendor. Though it may cost more to have parts delivered in batches, it may save more in time than having to organize and search through parts to be able to get to the welding stage. How many times each piece is handled in the shop may be an eye-opener to reducing wasted time. To measure such an intangible as this, operators are asked to put a soapstone mark on the piece each time it is touched – some companies are surprised to find out how many times a part is picked up, transported and laid down in the manufacturing process. In the case of one company, moving the welding shop closer to the heat treatment station eliminated four extra times that the part was handled. Basically, handling a part as few times as possible and creating a more efficient production line or work cell will reduce overall costs.

How to pick a welder tips: Fan on demand: Lowers running costs and reduces contamination to internal components. The fan kicks in when it’s needed, rather than running all day. Printed Circuit board protection: If the machine’s PCB’s are protected from dust & kept away from the fan, reliability will increase. Some manufacturers’ have the parts that need cooling in a duct type housing & the PCB isolated separately. Step voltage settings: If you’re looking at step voltage conventional MIG with multiple power settings – “the more the better!”

The weight of an angle grinder is important too – anything between 1.5 and 2.5 kg is acceptable for a 115 mm or 125 mm angle grinder. And don’t forget about accessories – budget angle grinders in particular are usually packaged with extra cutting or grinding wheels. I’ve tested out the best angle grinders, from high-tech cordless angle grinders to budget-friendly basic ones, so you don’t have to. Read on to see what I discovered… Makita is one of the most respected tool brands around, and the GA4530R is an excellent example of a professional-quality angle grinder. It’s easy to use, not too heavy and it’s built like a tank. There’s a good reason why builders and savvy DIYers across the world trust Makita. Their build quality and attention to detail are second to none. This angle grinder has a large rubberised rear grip and a tough power cable. I can see it lasting for a long time, even on a building site.

Some tips about welding equipment, MIG and TIG welders, plasma cutters. ARC Welding : ARC welding is one of the oldest welding processes around. It uses either an AC or DC power supply to create an electric arc between the welding rod and the workpiece metal to melt the metals and join them together. This style of welding is relatively inexpensive and very portable but it does require some practice to get good consistent welds and the welds will probably require some arc weldercleaning up afterwards. ARC welding is less suited to welding thinner materials but there is a large range of specialist electrodes (welding rods) available for ARC welders depending on what materials you are welding. ARC welding is versatile but more suited to heavier applications.

This portable weld fume extractor weighs 50 pounds only and features a 16-foot flexible wire. I’ve found the wheels to be extremely useful to move it around anywhere I need. It’s perfect for people who want something efficient but highly portable as well. The S130/G130 is an excellent option for manual welding around the house and store. Adaptable and Durable. The S130/G130 is a highly adaptable and powerful welding fumes extraction system in a small size. This unit can be used at welding school training due to its compact build quality and efficient fume extraction system. The 16-inch hose that it comes with is enough to cover any small to medium area. The machine is made with high-quality steel that makes it sturdy and durable.

If value for money is a priority to you, take a look at this drill from Evolution. It is a solid and durable drill that will get the job done for the professional steelworker as well as the weekend handyman. This drill has a 6-inch stroke length and comes with a 0.5-inch chuck and key. The drilling range has a diameter from 7/16? to 1-1/8? and cutting depth of 2 inches unless you change out the chuck to something else. You can place the feeding handle on either side of the drill, depending on what is comfortable to you. The heavy-duty magnet makes it easy to do overhead or horizontal drilling. An integrated cooling system will keep your magnetic drill press from overheating. There are some drawbacks to this drill. It can only turn at the speed of 570 RPM. This works great for when you are drilling steel or aluminum, but this speed is too high for drilling titanium or stainless steel. This drill may also be more primitive than conventional high-end magnetic drill presses.

Our vision and our distinct set of values drive the success and spirit of our organization. At ESAB, under Colfax leadership, we live our values. As a premiere U.S. welding equipment manufacturer, our vision and values help us to make strategic decisions, allocate resources, and focus our choices every day, domestically and internationally. ESAB offers a world of products and solutions for virtually every welding and cutting process and application. We serve industries that serve the world. The Best Team Wins – Team-oriented, involved associates are our most valuable resource, and we are passionate about attracting, developing, and retaining the best talent. Living this value is done in three primary ways: 1. Building the right team – having the right people to do the job; 2. Creating the right environment – making sure that leaders create an environment where all associates can contribute, and 3. Getting the win – when you have the right people and right environment – it makes getting the win a lot easier!

GPPH’s tables offer an incredibly stable and sturdy construction. The table top is made from 15MM thick material, this is outstanding when compared to the typical 6MM – 10MM that is usually used on lower end welding tables. In addition to this, the steel used is S355J2+N grade that is carefully selected. The steel is also unpickled so as to prevent the material becoming bright and causing arc to flash bounce off the table making the working conditions difficult for the welder. Finally, the tables are not coated with paint as it can make the surface difficult to conduct. They are coated with an oil based preparation which protects the tables during transport. Anti spatter is suggested.

Forney have built a simple, mid range MIG welder that’s solid and reliable. It has some good power for the price but doesn’t have as good a duty cycle as the Hobart 190 or Lincoln 180. Forney aren’t one of the big three brands but this machine is still solidly built and I’d feel comfortable buying this. If you want a basic 220v welder without any special features, this is a good choice. Read the full review here.

MIG welders are divided into transformer and inverter models. Briefly, transformer machines feature only mechanical parts that can adjust the output voltage “sequentially” while the unit is off. The output voltage is not stabilised and may decrease under load. Still, a simple design is the main benefit of transformer welders that facilitate their maintenance. Also, they are often cheaper. Inverter MIG welders are fitted with electronics that allow a smooth voltage adjustment, so it isn’t susceptible to drops and does not fall under load. Of course, power is the main feature of any electric tool. As for MIG welders, their power depends on the maximum amperage, more usually, the output range. This range determines the unit’s field of application. Powerful models can be used on small construction sites or in repair shops, while less powerful models are usually used for private needs. For example, the welders of up to 200A are great for home use; the 300A models are suitable for small repair shops, and if you need a high output and continuous work, consider welders over 300A.

UK market dive: Miller is a Wisconsin-based company that has been in the business since 1929. At just 38 pounds, the Millermatic is ultra-portable and is one of the lightest welders on our list. It is preferred by amateur welders and professionals alike for its usability. It is also one of the most expensive at over $3300, so bear that in mind as you read on! The Millermatic runs at dual voltage. It welds stainless steel, mild steel, and aluminum (with the help of a spool gun). It can weld mild steel to a thickness of 3/8 inches, giving it greater ability than the Hobart Handler. As for its aluminum welding capabilities, it can weld from 18 gauge to 3/8 inches again. It comes with flux core abilities.

Never drag, roll, or drop cylinders during the use. Always take care to maintain the valve caps during the transport. Avoid lifting the cylinder using a valve cap. Never store the cylinders for a long time period. Gas cylinders should only be purchased in small quantities. Never store them for long time periods. It is important to follow extreme precautions and safety measures while working with industrial gas cylinders due to several hazards and risks posed by them. Sourcing these cylinders from a reliable manufacturer is the most important safety measure for any facility owner using these cylinders.

When it comes to choosing the ultimate car welder or home accessory for your DIY projects, Sealey is one of the best-known and most popular names in the manufacturing world. The MightyMIG selection of welders produced by Sealey all come with an exceptional heavy-duty design, as well as an output transformer and a forced-air strategy for cooling to ensure that you can maintain your productivity and performance levels for as long as possible. The Sealey MightyMIG100 comes with a few added extras to improve your welding experience, including a comfort grip for your torch, a 1.8-metre cable for power, a 1-metre gas hose, and 45kg flux cored wire. There’s also a warranty included so you can safely do MIG welding without worrying about it breaking down within a couple of weeks. This heavy-duty welder includes a useful range of accessories and, with its compact and lightweight design, it’s sure to help you complete your DIY home projects. If you’re looking for something that’s great for a range of applications, then the Sealey MightyMIG is one of the most accessible professional-grade MIG welders available. Discover more info at https://www.weldingsuppliesdirect.co.uk/.

TIG welders store United Kingdom right now? Welding Supplies Direct stock a wide range of mag drills from industry leading manufacturers such as JEI Solutions, Alfra, Rix Tools, FEIN & Holemaker Technology. Our flagship mag drill partner, JEI Solutions, have a range that is suitable for every drilling / broaching application; be it low profile applications, on-site cutting for structural jobs or simple at home, DIY drilling. The HMT VersaDrive V35 is a British made 35MM mag drill that is available in both 110V & 230V input voltages. It has a 35MM maximum cut capacity with a 110MM maximum cutter length and is perfect for all drilling applications, especially structural steelworks. See extra information here mag drills.

In many shops, the operator has to go to a tool room or supply area for a new contact tip, coil of wire or other welding accessory. This takes valuable time away from the welding cell and slows down overall productivity. To improve the operating efficiency and minimize wasted time, companies should stock at least a limited supply of all necessary items near the welding station – this includes shielding gas, flux and wire. Another helpful productivity enhancing tip is to switch to larger spools of wire such as from 25 lb. spools to 44 or 60 lb. spools to even larger packages of 1,000 lb. reels or 1,000 lb. drums. A simple switch like this means less changeover time, which adds up over the weeks, months and years. Shops should also be on the lookout for shielding gas waste. A simple device called a surge turbine can be placed at the end of the gun to provide a digital readout of the gas surge and flow rate. If the surge rate is high, investing in a surge guard can reduce the pressure, eliminating gas surges and waste. Leaks in the gas delivery system can also create a potential loss of money. By looking at the amount of consumables purchased each year and then examining the total gas purchased, a company can determine if there is a significant loss. Welding manufacturers and distributors should be able to provide average utilization figures so that loss can be detected. If there is a loss suspected, one of the easiest ways to check for leaks is to shut off the gas delivery system over the weekend. Check the level on Friday evening and then again on Monday morning to determine if gas was used while the system was in shut down mode.

How to pick a welder tips: MIG wire inch button: A great feature. This will save you wasting your shielding gas when feeding wire through at the start of a new reel. Gas purge button: Another nice option. Save yourself some MIG wire, when you’re setting your gas flow. Burn back facility: Not all machines have this externally, buy it’s good to be able to trim the burn back to the wire according to the application & operator. Selecting the correct amperage machine: Generally, you should work on 35-40 amps per 1 mm diameter of material to be welded.

US tool brand DeWalt are known for making the best angle grinders, and the DCG405N is a step above the competition. Cutting the cord once and for all, this is a powerful grinder that makes use of DeWalt’s excellent XR battery system. This Dewalt angle grinder is not just a powerful cordless grinder though. The grip shape is supremely comfortable, and the whole unit weighs just 1 kg without the battery installed. You can lock-off the power switch when you need to get the grinder into awkward spots as well. This brushless angle grinder also features a host of clever safety features. I like the no-volt release to prevent accidental start-ups when a new battery is installed. The electronic brake and clutch are essential for safe operation too. The 18V brushless motor is ideal for battery use. It can make 69 cuts in ½” steel rebar when used with a 5.0 Ah battery. It doesn’t come with any batteries or one of DeWalt’s excellent TSTAK cases though, which is the case with bare power tools.

A few tips about welding equipment, MIG and TIG welders, plasma cutters. Flat-Position Welding Increases Welding Speed : It’s common knowledge that welding in a horizontal position will be the easiest and fastest way to weld. A flat position is not as taxing to maintain and the welding puddle will stay in place. Take some time to evaluate each project before beginning in order to make sure the majority of welds can be completed in this position. If a job calls for vertical welding, see this article about vertical welding. Core Wire Feeder Increases TIG Welding Speed: For professional welders hoping to speed up TIG welding, a core wire feeder will add filler metal through an automated process. Watch this video on how it works. This enables welders to work with both hands and to maintain a constant flow of wire into the welding puddle. Ed Craig at the Frabricator writes about the wire feeder process first developed in Europe, saying it is “suitable for all-position welding on materials of any thickness, the process addresses traditional GTAW limitations and can enhance both manual and automated TIG weld quality and productivity.”

If you’re looking for the best portable weld fume extractor that would be small but powerful and also would come within an affordable price range, then BAOSHISHAN has the perfect device for you! This fume extractor absorbs all sorts of gases and dust generated by soldering and welding. The 1.2m smoking pipe is an added benefit to this fantastic device. Compact Design and Convex Tips. This small and compact machine has a state-of-the-art build quality that ensures high performance. The filters come with metal latches that seal off the fumes and don’t let any fume get out of the device. The pipeline’s sealing and stability are improved by fine convex tips. The machine comes with sturdy wheels that help to move the unit to anywhere you want. Its suction pipe is built with several small pipes which allow it to move around freely.

Hougen 115 volt hmd904 magnetic drill press is one of the best mag drill machine available in the market. And also the best thing is that Hougen upgraded this drill press recently. Thus it becomes more efficient and accurate from the previous one through their continuous development and innovative designs. New attachments of this great product are slot drive arbor, which not only enhances accuracy but also enhances the change-out mechanism. Drill bit also made with sturdy material. Cutter/Mount – Rota broach or Copperhead 3/4 inch shank. Thus it can make a smooth hole. This is great for horizontal, overhead, tight areas, and getting out of another piece of steel.

The ESAB group is owned by Colfax Corporation. Over 100 years after the company was founded, ESAB serves a global market for welding and cutting equipment. The group is organized in the regions Europe, North America, South America, Asia/Pacific and India. ESAB is represented in almost every country by subsidiaries or agents. Sales and support is established in 80 countries and there are 26 manufacturing plants across four continents. Visit the web site of your nearest ESAB office to find out more. Customers Talk, We Listen – The voice of the customer will always drive the development of our strategic plans and actions. Living this value is done by getting Customer Input and Expectations, at every opportunity, and by differentiating ourselves in How We Deliver to our customers. Innovation Defines Our Future – Individual and organizational creativity will drive breakthrough ideas for technology, products, solutions, and processes. We live this value by providing differentiated customer solutions, creating products and services that improve quality of life and environmental stewardship through Creative Thinking, and by understanding What Innovation Brings.

Our welding tables are to be self-assembled. This is an easy process; full instructions are provided. A wide range of tools are available for use with these tables and they are available as added optional extras in the custom options above. If you require guidance on which tool set would be the most suitable for you please feel free to call our helpful staff. *Please note that current lead times on these welding tables are 3-4 weeks, however if you require the table quicker please alert us and we will do our best to assist with your enquiry*

Miller have spent time crafting a machine to the highest manufacturing standards that is perfect for reducing set up times and welding up to 3/8 in steel. The most notable feature is the Advanced Autoset feature which gets you welding out the box in no time. All you have to do is select your wire diameter, process type and metal thickness and you’re good to go. You can input your parameters manually if you’d prefer, but the Autoset is so advanced that you really won’t need to, the arc quality is spot on. It’s a versatile unit that is dual-voltage and is super lightweight so it’s easy to carry with the handle on the top. There are plenty of other fine details in this machine like the ‘Auto Spool Gun Detect’ which can automatically detect a spool gun and ‘Smooth-Start Technology’ to enable smooth welds. You have to pay a bit more for this welder, but you get a quality machine with fine attention to detail. See the full review here.

Out of a huge product range of the Dirty Pro Tools, we have found a top-grade MIG welder that turned out to be so good that we have decided to add it to this shortlist. It is the tool for welding metalware of medium thickness with the output range from 50? to 60?, best for sheets up to 2 mm thick. In addition, a pretty powerful converter of this welder allows working for about 6 minutes at 50?. So, you’ll be able to weld thin pieces for a good while, and the fan will provide a decent cooling of the tool. However, when the MIG welder overheats, the red light will flash telling you to stop welding and make a pause. By the way, you can pick either of 4 available amperage settings and adjust the wire feeding speed for reliable and straight welds. We were pleased by the package that includes a face shield, a clipping hammer, a brush and a spool of welding wire, so you can start welding right after unpacking the unit. So, this Dirty Pro Tools welder is one of the most affordable models for people seeking a mid-power machine to weld fine metal sheets.

United Kingdom market look: Lincoln Electric is an Ohio-based company started all the way back in 1895. For over 120 years, Lincoln has produced some fine quality welders, and the Handy is certainly one of them. At about $300, this welder is a bargain while also offering great results. For around $200 dollars more than the $99 Goplus, users can expect an uptick in overall power and performance. As this Lincoln welder is well known for being both reliable and durable, welders who aren’t expecting an overabundance of power will love this machine. People who have purchased the Lincoln Electric K2185-1 Handy MIG welder remark that it is stable and long-lived even with daily use. The Handy Lincoln welder is able to weld mild steel from 24 gauge up to 1/8 inches thick. It has four output power settings that the user can dial in. The fan cooling system reduces the risk of it overheating.

The following tips may help: Use the right type of regulator for the gas cylinder. Take care to inspect the regulator before attaching to the cylinder. If the connections aren’t properly made, perhaps you might be using the wrong device. Thus, it is wise to replace it with the right one. Close the valve of the cylinder, as well as release the pressure from the regulator, before removing it from a cylinder. Remove the regulator from the cylinder while transporting it to another location.

Even best welder for home use may not be enough for someone who plans on using their MIG welding skills in the workplace. If you’re looking for a high-quality machine that’s ideal for industry-grade jobs, then the Sealey SuperMIG180 may be an excellent choice. Designed as a professional car welder, the SuperMIG180 model is ideal if you’re welding with Argon and CO2. This high-quality model comes with a forced-air solution for cooling inside to make sure that you can extend your welding times without overheating. There’s also a non-live torch fitted into the system so you can reduce the risk of potentially creating arcs when you’re on the move between fast-paced job. Because it’s a professional-level welder, the Sealey SuperMIG also comes with a high-level CO2/Argon regulator, so you can limit your risk of dangerous mistakes as you work. Perhaps one of the easier-to-use small MIG welder options on the market, the Sealey model is very straightforward, particularly for professionals. Although it’s designed for high-level use, there’s nothing to stop you from making the most out of your system within your workshop too. The set comes with an industrial gas regulator, 2 contact tips to choose from, as well as a gas cup.

The Hobart Ironman 240 is the updated version to the Ironman 230 that recently has been discontinued. The 240 is a well-reviewed welder that delivers a wide range of power from 30 to 280 amps in a heavy-duty American-made chassis. Hobart equips the Ironman series with its “soft arc” technology for an easier striking, more spatter-free arc. If you are looking to weld aluminum, then like most of their MIG welders, they offer the package with a SpoolRunner 200 spool gun found here, for a few hundred extra bucks. This is a full-sized platform, offering a 15-foot gun connection and able to load a 44-pound spool of wire. Hobart backs the Ironman 240 with a strong five-year limited warranty. The power regulator has 12 notch settings for easy feel when setting the power level with gloves. This power regulator knob seems to be a problem for some users who have reported issues with the knob rotating freely and not changing the power setting. The only downside to this model is that it is unable to run directly off of a generator as it causes problems with the SCR firing timing of the welder. This makes it a bit less portable than some other welders, but nothing you can’t work around. Overall, this is a quality industrial-grade welder which is ideal for farm work which has been compared to Miller 252 – just without the digital screens and a few other features that most people wouldn’t need, but costs a lot less making it excellent value for the money. See additional details on https://www.weldingsuppliesdirect.co.uk/.

If you’re looking for a reliable cutting disc that can handle a variety of materials, this tool is a great option. This 10-pack of disc grinder cutting wheels is perfect for cutting metal and stainless steel surfaces. With thin metal cutting discs, you can easily get into tight spaces, and they are durable enough to handle even the toughest jobs. Whether you’re a professional contractor or a DIY enthusiast, these disc grinder cutting wheels are sure to come in handy. It’s made of durable aluminum oxide grains that provide an aggressive cutting action and longer service life. Due to the reinforced double fiberglass mesh, this disc meets the MPA en12413 standard. The Panlen Metal&Stainless Steel Cut-Off Disc for Angle Grinder is the perfect accessory for anyone with a 4.5 inch disc grinder. With this size, the cutting discs reach up to 13,000 RPM and 80M/S speeds. You can cut carbon steel, pipe, iron, copper and all other ferrous metals. It is made from tough abrasive materials, this disc can easily take on even the most challenging projects.