Ultrasonic tank level sensor online shopping with drurylandetheatre.com? The Liquid Level Controller is attached to the outside of the tank. Non-contact detection of tank liquid level. Liquid Level Controller supports liquid level alarm, fault alarm, and 485, Modbus, 4-20mA, FoundationFieldBus, PROFIBUS or Hart. Liquid Level Controller is installed outside the tank. The HS-ULC-Pro Liquid Level Controller works based on the principle of ultrasonic waves, and is also called “externally attached liquid level switch. It is mainly used to detect the liquid level of the storage tank, and its sensor (digital probe) acts on the outer wall of the storage tank. It supports upper and lower limit alarms, tanks Body temperature display or monitor whether there is liquid in the pipeline. Liquid Level Controller is suitable for liquid level process control in the pharmaceutical, petroleum, chemical, electric power and other industries.
The advantages of ultrasonic liquid level gauge are very outstanding. It is mainly reflected in the following aspects : The structure is simple. The reading is convenient. It is very easy to install and maintain. Of course, the ultrasonic liquid level gauge also has its own limitations and insurmountable defects. Specifically, it is mainly manifested in: Ultrasonic liquid level gauge can not be used in the occasions with water mist, medium that is easy to produce a lot of foam, and volatile medium. Because this kind of working condition is easy to absorb the sound wave or interfere with the sound wave emission, the signal is lost and the accuracy is reduced.
In the measurement, the ultrasonic pulse is emitted by the sensor (transducer), and the sound wave is reflected by the liquid surface and then received by the same sensor or ultrasonic receiver. Through piezoelectric crystal or magnetostrictive device into electrical signals. The distance between the sensor and the measured liquid surface is calculated by the time between the transmission and reception of sound waves. Find additional info at Ultrasonic level switch.
The External Ultrasonic Tank Level Sensor adopts the sonar echo ranging principle. It overcomes the influence of the tank wall on the transmission of ultrasonic signals. It adopts advanced digital signal processing technology. It can truly realize non-contact, high-precision measurement of the liquid level in the tank. The External Ultrasonic Tank Level Sensor can output 4-20mA standard signals or output the measurement results to the upper computer (or secondary meter) through the RS-485 interface. It can meet the automatic control of the system.
What is ultrasonic level sensor? Ultrasonic level sensor is a monitoring instrument for measuring liquid height, tank height, and material position. The ultrasonic level sensor can adopt two-wire, three-wire or four-wire technology. The two-wire system is: power supply and signal output are shared. The three-wire system is: the power supply circuit and the signal output circuit are independent. When using DC 24v power supply, a 3-core cable can be used, and the negative terminal of the power supply and the negative terminal of the signal output share a core wire. The four-wire system is: when using AC 220v power supply, or when using DC 24v power supply. When the power supply loop and the signal output loop are required to be completely isolated. A 4-core cable should be used. See extra info at https://www.drurylandetheatre.com/.